Amal Controls

1.model - diffuse reflection2.distance - 100mm3.output - cable4.typ1. Model - M52. Installation - Shielded 3. Sensing - Standard4. Plug - M85. Distance(mm) - 0.86. Type - NPN/NCe - 3 wires-LO PNP

1.model - diffuse reflection2.distance - 200mm3.output - cable4.type - 3 wires-LO NPN1. Model - M52. Installation - Shielded 3. Sensing - Standard4. Plug - M85. Distance(mm) - 0.86. Type - NPN/NC

1.supply - 12…24 Vdc2.installation - M8 3 pins3.width(mm) - 504. depth(mm) - 605.type - DO - PNP

1.supply - 12…24 Vdc2.installation - M8 3 pins3.width(mm) - 1804. depth(mm) - 1245.type - DO - PNP

1.model - background suppression2.distance - 600mm3.type - plug M12 - NPN

1.model - emitter+receiver2.distance - 50m3.type - plug M12 - NPN

SCR-K20LA  20Amp
SCR-K10LA  10Amp
SCR-K30LA  30Amp
SCR-K40LA  40Amp

The IDEC RH2B-ULD-DC125 is a compact power relay designed for efficient operation with a 125VDC coil voltage and 10A switching current. This DPDT relay features blade style terminals, an LED indicator, and a diode for enhanced functionality.

- 25.4mm standard mounting hole
- Hanyoung Nux new ASIC chip used (operation stability, long-distance detection)
- Built-in VR for sensitivity adjustment
- Convenient operation mode selection by VR
- You can check the presence of overload with the output short circuit notification function
- Excellent noise immunity and reduced disturbance of light influence
- Strong protection circuit

- Attached motion display light
- Built in output cutoff protecting circuit
- Attached sensitivity adjustment volume
- Selection of output operation due to control line
- Built in reverse connection of power protecting circuit

Drawing

No rod tip cap
KSHO×O

KSH ○ × C

Product Specifications

Self-correction method, ideal for high-speed collisions

Weight

(g)

• * The figures in the parentheses are the weight with a cap

Note 1: The main body comes with 2 mount nuts.
Note 2: The side mount bracket comes with 2 mounting bolts.

Internal structure and name of each part

When not in operation

In operationStandard table

Dual Slope A/D Converter. Accuracy of Display ± Large Size LED Display, Easy To Monitor. Rate of multiple settable Easy to measure high current with CT

HY-LS800 series

- Compact size and light weight by applying the plastic case
- Plastic case which provides safety regarding the electric leakage
- Various actuators (6 types) provide wide application
- IP54 protective structure (Applied only when using our company
connector model HYC-M1 in the wire opening)
- Connector rating of wire opening : 1/2 PF

Specification

Drawing

ø20 (diameter 20 mm), ø25 (diameter 25 mm)

ø16 (diameter 16 mm)

ø12 (diameter 12 mm)

⌀32 to 100 (diameter 32 to 100 mm)

⌀32 to 100 (diameter 32 to 100 mm)

 Product Specifications Internal structure and name of each part

Double acting (CDA) ø12 to 40 (diameter 12 to 40 mm)
Retaining ring, rod cover, rod packing, piston rod, piston packing, head cover, piston, cylinder main body

⌀50 to 100 (diameter 50 to 100 mm)
Tube gasket

Sensor Cylinder
Sensor switch, magnet, support

Material of main parts Standard tableCylinder diameter and strokeunit: mm

TBDA / HTBDA Series Precision Guided Actuators

Ingenious non-rotating actuator combines two cylinders into one compact body. Reducing design costs and number of parts for non-rotating devices. Strengthened long bushing for the rod bearings realizes efficient design. The Selection Guide provides a summary of the 11 different TBDA /HTBDA Series Precision Guided Actuators available. TBDA /HTBDA Series Precision Guided Actuators offer:

• Precise Accuracy, Non-Rotating
• Double Piston Construction
• Mount in Any Direction
• Stopper Bolt Allows for Stroke Adjustment
• Magnet for Sensor Switch Included
• RoHS Compliance

Operations
Double Acting Twin Rod
Double Acting Twin Rod Long Bushing

NHC1D_ALL - Parallel type Air Hand NHC1 Series

● Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Perfect for high rigidity and high accuracy chucking and handling. 40% lighter, 45% smaller than previous models.

EXCELON PLUS FILTER/REGULATOR WITH SHUT-OFF VALVE, G3/4, AUTOMATIC DRAIN, INTEGRATED ELECTRONIC PRESSURE SENSOR

Reduced weight and size Double safety lock on bowl Flush mounted integrated gauge New filter maintenance system

We AMAL CONTROLS is One stop for all your Industrial and Automation equipment requirements. Established on 2014 and known as Industrial Supply Division. AMAL CONTROLS is an excellent source and World-wide distributor of industrial automation equipments Pneumatics, Sensors, Inverters, Controllers, PLC, Process control equipments, Machine Shop Equipments, Industrial tools and Hydraulics as well as spare parts for a broad range of Industrial, Marine, Oil Gas, Construction Equipment.

We Provide our Products to all over India 

Hi-power supply:100mA/12VDC. Hi-speed response time:0.2ms. Easy to test with input pilotlamp. Easy to longer distance monitor with large size LED display. Long time memory with Ni-Cd battery.

Protection class:IP-66 High efficient emitting LED to extend life Proof of oil contamination & dust Anti-interrupted by general lighting instrument Enhance penetrability & Anti-interrupted by modified circuit

Power:90~256VAC Output method :Relay Display range:0~9999 Accuracy:±0.1% of FS Scale multiplier:0.01~99.99

The AE series is a product line consisting of several dust collector controllers used to sequence and control the operation of the dust collector valves.

EXCELON PLUS BOX SET (FRL), G1/2, AUTOMATIC DRAIN, 40ΜM FILTER ELEMENT, WITH SHUT-OFF VALVEReduced weight and size Double safety lock on bowl Flush mounted integrated gauge New filter maintenance system

Key Features:

• Embedded Ethernet Port
• Modbus TCP and RTU
• SD for Data Logging
• Optional RS485/RS232C Port
• 10A Relay Contacts
• Embedded Smart LCD/Keypad
• Embedded RTC
• USB Mini-B programming port
• Class 1 Div. 2 Hazardous Locations

Specifications:

• IEC 60079 compliant
• Compact and lightweight (46% footprint and 36% weight compared to IDEC’s 10-circuit IBPL)
• 8- and 16-circuit types are available in common wiring types, ideal for connection to PLCs. 16-circuit types are also available with a connector
• Universal AC power voltage (100 to 240V AC)
• No grounding required
• IDEC’s original spring-up terminal minimizes wiring time
• Installation
• 35-mm-wide DIN rail mounting or direct screw mounting
• ø6, ø8, ø10, ø22 and ø30 pilot lights available
• Illuminated pushbuttons and illuminated selector switches can be connected by combining with the EB3C relay barrier
• Illumination colors: Amber, blue, green, red, white, and yellow (push lock turn reset type: red only) Continuous and intermittent sound types are available for buzzers (ø30)

The AE series is a product line consisting of several dust collector controllers used to sequence and control the operation of the dust collector valves.

EXCELON PLUS BOX SET (FRL) FOR EXTREME APPLICATIONS, G3/4, MANUAL DRAIN, WITH SHUT-OFF VALVEUnique Quikclamp connection system offers full modularity Salt Spray compliant to ISO 9227 ABS cover with high impact properties Flush mounted integrated pressure gauge as standard

The AE series is a product line consisting of several dust collector controllers used to sequence and control the operation of the dust collector valves.

The AE series is a product line consisting of several dust collector controllers used to sequence and control the operation of the dust collector valves.

The AE series is a product line consisting of several dust collector controllers used to sequence and control the operation of the dust collector valves.

Also Available

HC-21P (2 Digit)
HC-41P (4 Digit)
HC-51P (5 Digit)
HC-61P (6 Digit)

Key Features:

• 10A Relay Contacts
• Embedded Smart LCD/Keypad
• Embedded 2-pt Analog Inputs
• Embedded RTC
• USB Mini-B programming port
• Class 1 Div. 2 Hazardous Locations

Key Features:

• Embedded Ethernet Port
• Modbus TCP and RTU
• 10A Relay Contacts
• Optional RS485/RS232C Port
• 10A Relay Contacts
• Embedded Smart LCD/Keypad
• Embedded RTC
• USB Mini-B programming port
• Class 1 Div. 2 Hazardous Locations